共找到85條詞條名為李志強的結果 展開

李志強

上海交通大學副研究員

李志強,男, 1998年-2001年在哈爾濱工業大學取得工學碩士(材料學院,鑄造專業)和博士學位(航天學院,複合材料專業)。2002年進入上海交通大學材料科學與工程博士后流動站,出站后留校工作,現任職金屬基複合材料國家重點實驗室,副研究員。主要從事金屬基複合材料製備科學研究,採用粉末冶金為基本技術手段,通過自主創新設計和製備輕質高強韌、結構功能一體化的先進金屬基複合材料,近年來並汲取自然界生物材料經億萬年進化優選的微觀結構設計,致力於具有創新複合構型的金屬基仿生複合材料的探索研究,尋求金屬基複合材料的發展方向。

基本介紹


代表性論著
1. Jingyue Wang, Zhiqiang Li, Genlian Fan, Zhixin Chen, and Di Zhang. Reinforcement with graphene nanosheets in aluminum matrix composites. Scripta Materialia. 2012, 66:594-597
2. Lin Jiang, Zhiqiang Li, Genlian Fan and Di Zhang. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility. Scripta Materialia. 2011, 65:412-415
3. Lin Jiang, Zhiqiang Li, Genlian Fan, Linlin Cao, Di Zhang. Strong and ductile carbon nanotube(CNT)/aluminum bulk nanolaminated composites with two-dimensional alignment of CNTs. Scripta Materialia. 2012, 66:3314
4. Lin Jiang; Genlian Fan; Zhiqiang Li; Xizhou Kai; Di Zhang. An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder. Carbon. 2011, 49:1965-1971
5. Lin Jiang, Zhiqiang Li, Genlian Fan, Linlin Cao, Di Zhang. The use of flake powder metallurgy to produce carbon nanotube/aluminum composites with a homogenous CNT distribution. 2012, 50:1993-1998
6. Linlin Cao, Zhiqiang Li, Genlian Fan, Lin Jiang, Di Zhang et al. The growth of carbon nanotubes in aluminum powders by the catalytic pyrolysis of polyethylene glycol. 2012, 50:1057-1062
7. Xu X, Li ZQ, Zhang D, Chen ZX. Growth of carbon nanospheres through a building block assembly method at 300 ℃. Carbon. 2011, 49:275-279
8. Zhanqiu Tan, Zhiqiang Li, Genlian Fan, Wenhuan Li, Qinglei Liu, Wang Zhang and Di Zhang. Two-dimensional distribution of carbon nanotubes in copper flake powders. Nanotechnology. 2011, 22:225603
9. Xizhou Kai; Zhiqiang Li; Wenlong Zhang; Genlian Fan; Lin Jiang; Weijie Lu; Di Zhang. A model for volume fraction and/or particle size selection in metal matrix composites. Materials Science and Engineering A. 2012, 530:574-579