HSIC

HSIC is a 2-signal (strobe,data) source synchronous serial interface which uses 240MHz DDR signaling to provide High-Speed 480Mbps USB transfers which are 100% host driver compatible with traditional USB cable-connected topologies. Full-Speed (FS) and Low-Speed (LS) USB transfers are not directly supported by the HSIC interface (a HSIC enabled hub can provide FS and LS support, as well as IC_USB support)

• High-Speed 480Mbps data rate only

• Source-synchronous serial interface

• No power consumed unless a transfer is in progress

• Maximum trace length of 10cm

• No hot Plug-n-Play support, no hot removal/attach

• Signals driven at 1.2V standard LVCMOS levels

• Designed for low-power applications

• No high-speed chirp protocal, the HSIC interface is always operated at high-speed

3G/4G modem