共找到2條詞條名為付雪松的結果 展開

付雪松

大連理工大學材料科學與工程學院講師

付雪松,男,畢業於大連理工大學材料科學與工程學院。擅長金屬材料表面噴丸強化技術;材料抗微動損傷技術;塑性加工技術;高溫結構陶瓷製備技術。現任大連理工大學材料科學與工程學院講師。

目錄

正文


付雪松:男,大連理工大學材料科學與工程學院講師
個人簡介
學歷:
1. 博士:大連理工大學,材料科學與工程學院, 2013.06
2. 碩士:大連理工大學,材料科學與工程學院,2009.06
3. 學士:哈爾濱工業大學,材料科學與工程學院,2007.07
工作經歷
2013.10-至今,大連理工大學,機械工程博士后流動站,師資博士后
2013.09-至今,大連理工大學,材料科學與工程學院,講師
研究領域(研究課題)
1. 金屬材料表面噴丸強化技術;
2. 材料抗微動損傷技術;
3. 塑性加工技術;
4. 高溫結構陶瓷製備技術
出版著作和論文 Xuesong Fu, Guoqing Chen, Yufei Zu, Junting Luo, Wenlong Zhou. Microstructure refinement of melt-grown Al2O3/YAG/ZrO2 eutectic composite by a new method: Melt superheating treatment, Scripta Materialia, 2013, 68: 731–734.
Guoqing Chen, Xuesong Fu, Junting Luo, Yufei Zu, Wenlong Zhou. Effect of cooling rate on the microstructure and mechanical properties of melt-grown Al2O3/YAG/ZrO2 eutectic ceramic, Journal of the European Ceramic Society, 2012, 32: 4195-4204.
Guoqing Chen, Xuesong Fu, Fei Zhao, Wenlong Zhou. Microstructure and mechanical properties of 2A12 aluminum alloy after age forming, Trans. Nonferrous Met. Soc. China, 2012, 22(8): 1975?1980.
Xuesong Fu, Guoqing Chen, Junting Luo, Yufei Zu, Wenlong Zhou. Shape-forming of melt-grown eutectic composition of Al2O3/YAG/ZrO2 ceramic, Materials Research Innovations, 2013, 179(1): 39-42.
付雪松, 陳國清, 王中奇, 周文龍. AZ31鎂合金熱軋變形的動態再結晶機制, 稀有金屬材料與工程, 2011, 40(8): 1473-1477.
Guoqing Chen, Xuesong Fu, Yanhui Wei, Shan Li, Wenlong Zhou. Microstructure and wear properties of nickel-based surfacing deposited by plasma transferred arc welding, Surface & Coatings Technology, 2013,228:5276-5282.
Xuesong Fu, Guoqing Chen, Yufei Zu, Junting Luo, Wenlong Zhou. Microstructure Refinement Approaches of Melt-Grown Al2O3/YAG/ZrO2 Eutectic Bulk. Ceramics international, 2013, 39:7445-7452.
GuoQing Chen, NaNa Li, XueSong Fu, WenLong Zhou. Preparation and characterization of a sodium polyacrylate/sodium silicate binder used in oxidation resistant coating for titanium alloy at high temperature, Powder Technology, 2012, 230: 134–138.
Guoqing Chen, Yufei Zu, Jueting Luo, Xuesong Fu, Wenlong Zhou. Microstructure and superplastic behavior of TiO2-doped Al2O3-ZrO2 (3Y) composite ceramics, Materials Science and Engineering A, 2012, 554: 6-11.
Zhonggang Sun, Guoqing Chen, Xuesong Fu, Yaoqi Wang, Hongliang Hou, Wenlong Zhou. TEM investigations on hydrogen induced phase transformation in Ti-6Al-4V alloys, Acta metallurgica sinica-english letters, 2010, 23(5): 357-362.
Guoqing Chen, Junhui Song, Xuesong Fu, Yuxian Zhao, Wenlong Zhou. Effect of hot extrusion on microstructure and mechanical properties of electromagnetic continuous cast AZ31 magnesium alloy, International Journal of Modern Physics B, 2009, 23(6-7):990-995.
Chen Guoqing, Zu Yufei, Xie Jie, Fu Xuesong. Fabrication and Superplastic Deformation of Al2O3/YSZ/MgAl2O4 Composite Ceramic, Advanced Materials Research, 2010, 105-106: 188-191. EI檢索
Chen Guoqing, Zu Yufei, Luo Junting, Fu Xuesong, Zhou Wenlong. Superplastic forming of oxide ceramic composite. Key Engineering Materials, 2012, 512-515: 407-410.
胥廣亮, 陳國清, 周文龍, 付雪松, 孫中剛。等徑角擠壓對AZ31鎂合金組織及力學性能影響, 材料工程,2011, 2: 69-72. EI檢索.
陳國清, 康凱, 付雪松, 周文龍. 熱處理工藝對重型履帶板用鋼組織與性能的影響, 材料熱處理學報, 2011, 32: 111-116. EI檢索.
李娜娜,陳國清,付雪松,周文龍。鈦合金高溫防氧化玻璃-陶瓷塗料的製備及表徵. 塗料工業,2012, 42(8): 60-65.
陳國清, 宋軍輝, 付雪松, 胥廣亮, 周文龍. Microstructure and mechanical properties of as-extruded continuous casting AZ31 magnesium alloy, 塑性工程學報(英文), 2009, 16: 50-55.