塗善東

1989年—1990年在西南交通大學力學所從事博士后研究工作。

1990年—1993年受邀擔任瑞典皇家理工學院客席研究員(Guest scientist)。

1993年—2001年擔任南京化工大學、南京工業大學副校長、機械工程學院副教授、教授、院長，兼任熱管技術研究所所長、中石化南京設備失效分析與預防研究中心總工程師。

1998年6月—12月前往韓國中央大學訪問教授(Brain pool scholar)。

2001年11月起擔任華東理工大學化工過程機械學科教育部“長江學者獎勵計劃”特聘教授。

2006年6月—2015年7月擔任華東理工大學副校長。

2015年7月教育部決定免去塗善東的華東理工大學副校長職務。

2019年11月當選為中國工程院院士。

諾丁漢大學榮譽教授、國際壓力容器學會亞太地區主席、國際機構學與機器科學聯合會(IFToMM)可靠性委員會委員、英國工程結構完整性聯盟 (FESI)高級顧問、中國化工教育協會副會長、中國機械工程學會壓力容器學會榮譽理事長、材料學會榮譽理事長；擔任Applied Energy, International Journal of Pressure Vessels and Piping, Fatigue and Fracture of Engineering Materials and Structures,Journal of Materials Science & Technology, Frontiers of Mechanical Engineering, Advances in Mechanical Engineering、化工進展、壓力容器、機械強度、應用基礎與工程科學學報等期刊副主編或編委。兼任中航商發航空發動機壽命預測聯合創新中心首席科學家、上海市航空發動機工程技術研究中心技術委員會主任。

研究方向

化工裝備安全，高溫強度學，先進能源材料與裝備，倡導全面工程教育。

著作與專輯

塗善東.溫結構完整性原理, 北京: 科學出版社, 2003.

塗善東等。材料服役中表面的失效行為及防治. 見: 中國材料工程大典第16卷.北京:化學工業出版社, 2005.

塗善東等。機械結構強度與失效，見：機械科學與製造－國家自然科學基金委員會十一五戰略研究報告. 北京：科學出版社，2006.

塗善東，過程裝備與控制工程概論. 北京: 化學工業出版社, 2009.

塗善東等. 零件與結構的失效與安全服役. 見：機械工程學科發展戰略報告（2011-2020）. 北京：科學出版社, 2010.

王磊,塗善東. 材料強韌學基礎, 上海: 上海交通出版社, 2012.

Tu ST, Zhou GY. Compact Heat Exchangers in Clean Energy Systems. In Handbook of Clean Energy Systems, Wiley, 2014.

Fatemi A, PookLP, Spagnoli A,Tu ST(Guest Editor). Special Issue on ‘Multiaxial Fracture 2013’, Engineering Fracture Mechanics 2014; (Volume 123), Oxford: Elsevier.

Yan J, Chou SK,Tu ST, Jin HG, Desideri U (Guest Editor). Special Issue on Energy Innovations for a Sustainable World, Applied Energy 2013; (Volume 112), Oxford: Elsevier.

Tu ST, Wang GZ, Gong JM (Guest Editor). Special issue on Latest Development of Applied Materials Technology, Advanced Materials Research (Volume 509). Switzerland: Trans Tech Publications, 2012.

Tu ST, Takahashi Y (Guest Editor). Special issue on high temperature strength, Acta Metallurgica Sinica. Oxford: Elsevier. 2011.

Takahashi Y,Tu ST(Guest Editor). Special issue on high temperature strength, International Journal of Pressure Vessels and Piping. Oxford: Elsevier. 2009.

發表論文

Liu Yang, Zhoujie Wang, William Dempster, Xinhai Yu,Shan-Tung Tu. Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions, Journal of Loss Prevention in the Process Industries, 2017, 45: 133-146。

Guo-Jian Deng,Shan-Tung Tu, Xian-Cheng Zhang, Ji Wang, Cheng-Cheng Zhang, Xia-Yi Qian, Yi-Ning Wang. Small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH4169 at 650 degrees C in air. Engineering Fracture Mechanics 2016; 153: 35-49.

Hong-Shu Ma, Guo-Zhen Wang, Shi Liu,Shan-Tung Tu, Fu-Zhen Xuan. In-plane and out-of-plane unified constraint-dependent creep crack growth rate of 316H steel. Engineering Fracture Mechanics 2016; 155: 88-101.

Jian-Feng Wen,Shan-Tung Tu. A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction. Engineering Fracture Mechanics, 2014; 123: 197-210.

Ming-Liang Zhu, Fu-Zhen Xuan,Shan-Tung Tu. Observation and modeling of physically short fatigue crack closure in terms of in-situ SEM fatigue test. Materials Science and Engineering: A, 2014; 618: 86-95.

Yu-Cai Zhang, Wen-Chun Jiang,Shan-Tung Tu, Jian-Feng Wen. Simulation of creep and damage in the bonded compliant seal of planar solid oxide fuel cell．International Journal of Hydrogen Energy, 2014; 39: 17941-17951.

Xian-Cheng Zhang,Shan-Tung Tu, Fu-Zhen Xuan. Creep–fatigue endurance of 304 stainless steels. Theoretical and Applied Fracture Mechanics, 2014; 71: 51-66.

Yu-Cai Zhang, Wen-Chun Jiang,Shan-Tung Tu, Jian-Feng Wen．Using short-time creep relaxation effect to decrease the residual stress in the bonded compliant seal of planar solid oxide fuel cell – A finite element simulation．Journal of Power Sources, 2014; 255: 108-115.

Jian-Ping Tan, Guo-Zhen Wang,Shan-Tung Tu, Fu-Zhen Xuan. Load-independent creep constraint parameter and its application. Engineering Fracture Mechanics, 2014; 116: 41-57.

Jie Yang, Guo-Zhen Wang, Fu-Zhen Xuan,Shan-Tung Tu. Unified correlation of in‐plane and out‐of‐plane constraints with fracture toughness. Fatigue & Fracture of Engineering Materials & Structures, 2014; 37(2): 132-145.

Yun Tu,Shan-Tung Tu. Fabrication and characterization of a metal-packaged regenerated fiber Bragg grating strain sensor for structural integrity monitoring of high-temperature components. Smart Materials and Structures, 2014; 23(3): 035001-1-11.

Fa-Kun Zhuang, Guo-Yan Zhou,Shan-Tung Tu. Numerical investigation of frictional effect onmeasuring accuracy of different small specimen creep tests. International Journal of Pressure Vessels and Piping, 2013;110:42-49.

Jian-Feng Wen,Shan-Tung Tu, Xin-Lin Gao, JN Reddy. Simulations of creep crack growth in 316 stainless steel using a novel creep-damage model. Engineering Fracture Mechanics, 2013; 98: 169-184.

Yun Tu, Yu-Hua Qi,Shan-Tung Tu. Fabrication and thermal characteristics of multilayer metal-coated regenerated grating sensors for high-temperature sensing. Smart Materials and Structures, 2013; 22-28.

Jian-Ping Tan,Shan-Tung Tu, Guo-Zhen Wang, Fu-Zhen Xuan. Effect and mechanism of out-of-plane constraint on creep crack growth behavior of a Cr-Mo-V steel. Engineering Fracture Mechanics, 2013;99:324-34.

Shan-Tung Tu, Xin-Hai Yu, Wei-Ling Luan, Hoger Loewe. Development of micro chemical, biological and thermal systems in China. Chemical Engineering Journal, 2010; 163(3): 165-179.