劉靜

劉靜（小）：男，博士 重慶大學機械機械工程學院講師。

滾動軸承動力學

有限元模擬分析

齒輪箱振動雜訊控制

2003.7-2007.9，重慶大學，本科；

2007.9-2009.3，重慶大學，碩士；

2009.3-2014.6，重慶大學，博士；

獲2014年重慶大學優秀博士論文；

獲2015年重慶大學第五屆青年教師教學基本功比賽一等獎。

Liu J, Shao Y M, Lim T C. Vibration analysis of ball bearings with a localized defect applying piecewise response function [J]. Mechanism and Machine Theory, 2012, 56: 156-169. (SCI收錄)

Liu J, Shao Y M, Zuo M J. The effects of the shape of localized defect in ball bearings on the vibration waveform [J]. Proc IMechE, Part K: Journal of Multi-body Dynamics, 2013, 227(1): 261-274. (SCI收錄)

Liu J, Shao Y M, Lim T C. Impulse vibration transmissibility characteristics in the presence of localized surface defects in ball bearing systems [J]. Proc IMechE, Part K: Journal of Multi-body Dynamics, 2014, 228(1): 62-81. (SCI收錄)

Liu J, Shao Y M, Zhu W D. A new model for the relationship between vibration characteristics caused by the time-varying contact stiffness of a deep groove ball bearing and defect sizes [J]. ASME Journal of Tribology, 2015, 137(3): 031101. (SCI收錄)

Liu J, Shao Y M. A new dynamic model for vibration analysis of a ball bearing due to a localized surface defect considering edge topographies [J]. Nonlinear Dynamics, 2015, 79(2): 1329-1351. (SCI收錄)

Liu J, Zhu W D, Charalambides P G, Shao Y M, Xu Y F, Wu K. Four-Beam model for vibration analysis of a cantilever beam with an embedded horizontal crack [J]. Chinese Journal of Mechanical Engineering. 2015, DOI: 10.3901/CJME.2015.0901.108. (SCI收錄)

Liu J, Shao Y M. Vibration modelling of nonuniform surface waviness in a lubricated roller bearing [J]. Journal of Vibration and Control. 2015, DOI: 10.1177/1077546315589675. (SCI收錄)

Liu J, Shao Y M. A numerical investigation of effects of defect edge discontinuities on contact forces and vibrations for a defective roller bearing [J]. Proc IMechE, Part K: Journal of Multi-body Dynamics. 2015, DOI: 10.1177/1464419315615451. (SCI收錄)

Liu J, Shao Y M, Zhu W D. Free vibration analysis of a cantilever beam with a slant edge crack [J]. Proc IMechE, Part C: Journal of Mechanical Engineering Science. 2015. Accept. (SCI收錄)

Shao Y M, Liu J, Mechefske C K. Drive axle housing failure analysis of a mining dump truck based on the load spectrum [J]. Engineering Failure Analysis, 2011, 18(3): 1049-1057. (SCI收錄)

Shao Y M, Liu J, Ye J. A new method to model a localized surface defect in a cylindrical roller bearing dynamic simulation [J]. Proc IMechE, Part J: Journal of Engineering Tribology, 2014, 228(2): 140-159. (SCI 收錄)

Liu J, Shao Y M, Zhou J J, Fan Y L. Vibration analysis of a cylindrical roller bearing considering multiple localized surface defects on races [J]. International journal of COMADEM, 2014, 17(1): 25-32. (EI收錄)

劉靜, 邵毅敏, 秦曉猛, 周儉基. 基於非理想Hertz線接觸特性的圓柱滾子軸承局部故障動力學建模[J]. 機械工程學報, 2014, 50(1): 91-97. (EI收錄)

Chen J, Liu J, Shao Y M, Luo C H. Vibration modeling of lubricated rolling element bearing considering skidding in loaded zone [J]. Journal of Failure Analysis and Prevention, 2014, 14 (1): 809-817. (EI收錄)

Xu Y F, Zhu W D, Liu J, Charalambides P G, Shao Y M. Non-model-based damage detection of embedded horizontal cracks [J]. Journal of Sound and Vibration, 2014, 333(23): 6273-6294. (SCI收錄)