肖伯律

肖伯律

性　別 男

最高學歷 博士研究生

職　稱 研究員

專家類別 碩士生導師

部　門 瀋陽材料科學國家（聯合）實驗室 非平衡金屬材料研究部

通訊地址 遼寧省瀋陽市瀋河區文化路72號，中國科學院金屬研究所，非平衡金屬材料研究部

1999年09月–2002年06月，中國科學院金屬研究所，材料加工工程專業，博士

1996年09月–1999年06月，甘肅工業大學（現蘭州理工大學），材料工程系，碩士

1992年09月–1996年06月，吉林工業大學（現吉林大學南嶺校區），金屬材料工程系，學士

2009年11月–現在，中國科學院金屬研究所，瀋陽材料科學國家（聯合）實驗室，非平衡金屬材料研究部，研究員

2007年12月–2009年10月，中國科學院金屬研究所，瀋陽材料科學國家（聯合）實驗室，非平衡金屬材料研究部，高級工程師/引進優秀學者

2002年7月–2007年11月，北京有色金屬研究總院，國家有色金屬複合材料工程技術研究中心，博士后，高級工程師

金屬基複合材料，攪拌摩擦焊接

[1]D. Wang, B. L. Xiao*, Q. Z. Wang, Z. Y. Ma, Evolution of the Microstructure and Strength in the Nugget Zone of Friction Stir Welded SiCp/Al-Cu-Mg Composite. Journal of Materials Science & Technology

[2]H. L. Hao, D. R. Ni, Z. Zhang, D. Wang, B. L. Xiao*, Z. Y. Ma, Microstructure and mechanical properties of Al-Mg-Er sheets jointed by friction stir welding. Materials & Design

[3]Z. Y. Liu, B. L. Xiao, W. G. Wang, Z. Y. Ma*, Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling. Carbon

[4]P. Xue, B. L. Xiao, Z. Y. Ma*, Enhanced strength and ductility of friction stir processed Cu-Al alloys with abundant twin boundaries. Scripta Materialia

[5]D. Wang, B. L. Xiao*, Q. Z. Wang, Z. Y. Ma, Friction stir welding of SiCp/2009Al composite plate. Materials & Desig

[6]Q. Yang, B. L. Xiao*, Z. Y. Ma*, Enhanced superplasticity in friction stir processed Mg-Gd-Y-Zr alloy. Journal of Alloys and Compounds

[7]H. L. Hao, D. R. Ni, H. Huang, D. Wang, B. L. Xiao*, Z. R. Nie, Z. Y. Ma, Effect of welding parameters on microstructure and mechanical properties of friction stir welded Al-Mg-Er alloy. Materials Science and Engineering A

[8]Q. Zhang, B. L. Xiao, W. G. Wang, Z. Y. Ma*, Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO2 system by friction stir processing. Acta Materialia

[9]Z. Y. Liu, S. J. Xu, B. L. Xiao*, P. Xue, W. G. Wang, Z. Y. Ma, Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites. Composites A

[10]Z. Y. Liu, B. L. Xiao, W. G. Wang, Z. Y. Ma*, Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing. Carbon

[11]Q. Zhang, B. L. Xiao*, Z. Y. Liu, Z. Y. Ma, Microstructure evolution and elemental diffusion of SiCp/Al-Cu-Mg composites prepared from elemental powder during hot pressing. Journal of Materials Science

[12]Q. Yang, B. L. Xiao, Z. Y. Ma*, R. S. Chen, Achieving high strain rate superplasticity in Mg-Zn-Y-Zr alloy produced by friction stir processing. Scripta Materialia

[13]B. L. Xiao, Q. Yang, J. Yang, W. G. Wang, G. M. Xie, Z. Y. Ma*, Enhanced mechanical properties of Mg-Gd-Y-Zr casting via friction stir processing. Journal of Alloys and Compounds

[14]Z. Y. Liu, Q. Z. Wang, B. L. Xiao*, Z. Y. Ma, Clustering model on the tensile strength of PM processed SiCp/Al composites. Composites A

[15]Z. Y. Liu, Q. Z. Wang, B. L. Xiao*, Z. Y. Ma, Y. Liu, Experimental and modeling investigation on SiCp distribution in powder metallurgy processed SiCp/2024 Al composites. Materials Science and Engineering A

[1]8th International Conference on Processing & Manufacturing of Advanced Materials（THERMEC 2013）,美國拉斯維加斯，分會報告題目：Effects of plastic deformation on the particle distributions of SiCp/2009Al composites: experiments and multi-scale simulation

[2]1st International Joint Symposium Joining and Welding 2013，日本大阪，分會報告題目：Influence of friction stir processing parameter on microstructure of Mg-Gd-Y-Zn-Zr casting

[1]肖伯律、王東、王全兆、馬宗義. 提高不連續增強鋁基複合材料攪拌磨擦焊接頭強度的工藝

[2]王全兆、王東、肖伯律、馬宗義. 一種用於金屬基複合材料攪拌摩擦焊接的複合式焊接工具

[3]馬宗義、馮艾寒、肖伯律. 一種提高鋁基複合材料可焊性的攪拌摩擦焊接工藝