宋波

2010/03 - 2013/06，重慶大學，材料科學與工程，博士

2007/09 - 2009/12，重慶大學，材料科學與工程，碩士

2003/09 - 2007/06，中北大學，無機非金屬材料，學士

2018/07-至今，西南大學，材料與能源學部，副教授

2013/07 - 2018/06，西南大學，材料與能源學部，講師

入職以來發表教改論文1篇，指導本科生髮表CSCD學術論文1篇，指導本科生申請並立項國家大學生創新基金1項。

本科生課程：《材料力學性能》、《粉末冶金原理》、《材料物理性能》

研究生課程：《材料成型與控制》

金屬材料的微觀結構表徵及組織性能控制；鎂合金塑性變形、強韌化機理及衝壓成形性能；基於梯度應變的微觀組織調控及變形機理研究；基於低成本、短流程、高性能金屬型材的新型加工技術開發等。

參與兩項科技部“973”項目及多項國家自然科學基金的研究工作。主持包括省部級基金、重點實驗室開放基金、中央高校和研究生創新基金等多項科研項目。已在Scr Mater, Mater Sci Eng A, Mater Des, J Alloy Compd, Mater Charact, Acta Metall Sin.等國內外知名期刊上發表學術論文30餘篇, 被引用300餘次。

B. Song, N. Guo, R. Xin, H. Pan, C. Guo.Strengthening and toughening of extruded magnesium alloy rods by combining pre-torsion deformation with subsequent annealing. Materials Science and Engineering A. 2015, doi:10.1016/j.msea.2015.10.069.(SCI)

N. Guo*, B. Song*, H. Yu, R. Xin, B. Wang, T. Liu.Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation. Materials and Design. 2015,(SCI)

N. Guo, B. Song*, C. Guo, R. Xin *, Q. Liu.Improving tensile and compressive properties of magnesium alloy rods via a simple pre-torsion deformation. Materials and Design. 2015, 83: 270-275.(SCI)

B. Song, R. Xin, N. Guo, J. Xu, L. Sun, Q. Liu.Dependence of tensile and compressive deformation behavior on aging precipitation in rolled ZK60 alloys. Materials Science and Engineering A. 2015, 639: 724-731.(SCI)

B. Song, R. Xin, A. Liao, W. Yu, Q. Liu.Enhancing stretch formability of rolled Mg sheets by pre-inducing contraction twins and recrystallization annealing.Materials Science and Engineering A. 2015, 627: 369-373.(SCI)

B. Song, R. Xin, X. Zeng, G. Chen and Q. Liu.Activation of multiple twins by pre-tension and compression to enhance the strength of Mg-3Al-1Zn alloy plates. Materials Science and Engineering A. 2015, 621: 100–104.(SCI)

N. Guo, B. Song, B. Wang, Q. Liu.Influence of torsion deformation on textures of cold drawing pearlitic steel wires. Acta Metallurgica Sinica (English Letters). 2015, 50: 285-292.(SCI)

C. Guo, R. Xin, J. Xu, B. Song, Q. Liu.Strain compatibility effect on the variant selection of connected twins in magnesium. Materials & Design, 2015, 76: 71-76.(SCI)

Q. Yang, B. Jiang, W. Jiang, B. Song, S. Luo and F. Pan.Microstructural Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheets with Li Addition. Materials Science Forum. 2015, 816: 399-403.(Inter. Conf. Article) (EI)

H. Pan, G. Qin, M. Xu, H. Fu, Y. Ren, F. Pan, Z. Gao, C. Zhao, Q. Yang, J. She, B. Song.Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn. Materials & Design, 2015, 83: 736–744.(SCI)

B. Song, R. Xin, Y. Liang, G. Chen and Q. Liu.Twinning characteristic and variant selection in compression of a pre-side-rolled Mg alloy sheet. Materials Science and Engineering A. 2014, 614 (22): 106–115.(SCI)

B. Song*, N. Guo, T. Liu and Q. Yang.Improvement of formability and mechanical properties of magnesium alloys via pre-twinning: A review. Materials and Design. 2014, 62: 352–360.(Review Article) (SCI)

宋波, 辛仁龍, 孫立雲, 陳剛, 劉慶.鎂合金拉伸壓縮不對稱性的影響因素及控制方法. 中國有色金屬學報. 2014, 24(8): 1941-1952. (Review Article) (EI)

宋波*, 辛仁龍, 郭寧, 劉婷婷, 楊青山.變形鎂合金室溫應變硬化行為的研究進展. 中國有色金屬學報. 2014, 24(11): 2699-2710. (Review Article) (EI)

B. Song, R. Xin, G. Chen, K. Zeng, G. Huang, Qing Liu.Influence of various precipitate phases on tensile properties of an extruded Mg-Y-Nd alloy. Materials Science Forum. 2014, 788: 17-22. (Inter. Conf. Article)(EI)

N. Guo, B. Song, B. Luan, Z. Chen, Q. Liu.Deformation bands in fully pearlitic steel during wire drawing. Science China Technological Sciences. 2014, 57: 796-803.(SCI)

Q. Yang, B. Jiang, J. He, B. Song, W. Liu, H. Dong, F. Pan.Tailoring texture and refining grain of magnesium alloy by differential speed extrusion process. Materials Science and Engineering A. 2014. 612(26): 187-191.(SCI)

C. Guo, R. Xin, C. Ding, B. Song, Q. Liu.Understanding of variant selection and twin patterns in compressed Mg alloy sheets via combined analysis of Schmid factor and strain compatibility factor. Materials Science and Engineering A. 2014, 609: 92-101.(SCI)

Q. Yang, B. Jiang, H. Pan, B. Song, Z. Jiang, J. Dai, L. Wang, F. Pan.Influence of different extrusion processes on mechanical properties of magnesium alloy. Journal of Magnesium and Alloys. 2014, 2(3): 220-224.

B. Song, R. Xin, L. Sun, G. Chen and Q. Liu.Enhancing the strength of rolled ZK60 alloys via the combined use of twinning deformation and aging treatment. Materials Science and Engineering A. 2013. 582: 68-75.(SCI)

宋波, 辛仁龍, 陳剛, 孫立雲, 劉慶.熱軋及熱處理對Mg-Y-Nd合金組織的影響. 中國有色金屬學報. 2013, 23(10): 2721-2729.(EI)

B. Song, R. Xin, G. Chen, X. Zhang and Q. Liu.Improving tensile and compressive properties of magnesium alloy plates by pre- cold rolling. Scripta Materialia. 2012, 66: 1061-1064.(SCI)

B. Song, R. Xin, G. Chen, X. Zhang and Q. Liu.Mechanical properties and anisotropy of Mg alloys with twin lamellae.33rd Risoe International Symposium on Materials Science. 2012: 337-347.(Inter. Conf. Article)

宋波, 辛仁龍, 劉慶.析出相對鎂合金變形機理影響的研究進展. 中國有色金屬學報. 2011, 11: 2019-2731. (Review Article)(EI)

H. Zhang, G. Huang, B. Song, L. Zhang and D. Kong.Influence of microstructure and texture on formability of AZ31B magnesium alloy sheets.Transactions of Nonferrous Metals Society of China. 2011, 21(4): 844-850.(SCI)

R. Xin, L. Li, K. Zeng, B. Song, Q. Liu.Structural examination of aging precipitation in a Mg–Y–Nd alloy at different temperatures. Materials Characterization. 2011, 62: 535-539.(SCI)

L. Zhang, G. Huang, H. Zhang and B. Song.Cold stamping formability of AZ31B magnesium alloy sheet undergoing repeated unidirectional bending process. Journal of Materials Processing Technology. 2011, 211(4):644-649.(SCI)

G. Huang, H. Zhang, X. Gao, B. Song and L. Zhang.Forming limit of textured AZ31B magnesium alloy sheet at different temperatures. Transactions of Nonferrous Metals Society of China. 2011, 21(4): 836-843.(SCI)

H. Zhang, G. Huang, D. Kong, G. Sang and B. Song.Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures. Journal of Materials Processing Technology. 2011, 211:1575-1580.(SCI)

B. Song, G. Huang, H. Li, L. Zhang, G. Huang and F. Pan.Texture evolution and mechanical properties of AZ31B magnesium alloy sheets processed by repeated unidirectional bending.Journal of Alloys and Compounds. 2010, 489: 475-481. (SCI)

R. Xin, B. Song, K. Zeng, G. Huang and Q. Liu.Effect of aging precipitation on mechanical anisotropy of an extruded Mg-Y-Nd alloy. Materials and Design. 2012, 34:384-388. (SCI)

G. Huang, B. Song, W. Xu and L. Zhang.Structure and properties of AZ31B magnesium alloy sheets processed by RUB at different temperatures. Transactions of Nonferrous Metals Society of China. 2010, 10: 1815-1821. (SCI)

G. Huang, H. Li, B. Song and L. Zhang.Tensile properties and microstructures of AZ31B magnesium alloy sheets undergoing repeated unidirectional bending. Transactions of Nonferrous Metals Society of China. 2010, 20: 28-33.(SCI)

G. Huang, L. Zhang, B. Song and F. Pan.Cold Stamping for AZ31B Magnesium Alloy Sheet of Cell Phone House. Transactions of Nonferrous Metals Society of China. 2010, 20(s2), s608-s612.(SCI)

G. Huang, W. Xu, G. Huang, H. Li and B. Song.Textural evolution of AZ31B magnesium alloy sheets undergoing repeated unidirectional bending at room temperature. Journal of Materials Science Technology. 2009, 25(3): 365-369.(SCI)

一種提高純銅棒材拉伸強度的方法. 申請號: 201510278171.5. 中國發明專利. 2015.

一種鎂合金棒材的加工方法. 申請號：201510029162.2. 中國發明專利. 2015.

一種改善鎂合金板帶材成形性能的方法. 授權號：ZL200910103073.2. 中國發明專利. 2010.

. 授權號：ZL200720188735.7. 實用新型專利. 2008.