柴林江

教師姓名：柴林江

職稱/職務：重慶理工大學材料科學與工程學院副教授

所屬三級機構：材料成型及控制工程系

從事專業：材料科學與工程

2014/01 – 現在，重慶理工大學，材料科學與工程學院，材料工程系，講師/副教授

2012/09 – 2013/09，美國North Carolina State University，核工程系，聯合培養博士；

2008/09 – 2013/12，重慶大學，材料科學與工程學院，材料加工工程系，博士（碩博連讀）；

2004/09 – 2008/07，重慶大學，機械工程學院，材料成型及控制工程系，學士（保送研究生）；

金屬材料的相變晶體學與動力學、塑性變形及再結晶機制、高能束表面改性研究；先進微觀組織/織構表徵分析技術。

材料成型專業英語、材料成形原理、材料成型技術基礎

主持國家自然科學基金項目1項、中國博士后科學基金面上資助1項、重慶市博士后特別資助（一等）1項、重慶市教委科學技術研究項目1項；主研國家級和省部級科研項目10餘項。

在Acta Materialia等高水平學術期刊上以第一作者或通訊作者身份發表SCI論文18篇（二區以上11篇）；申請發明專利十餘項。

部分代表性論文（*通訊作者）：

[1] L. Chai, B. Luan*, K.L. Murty, Q. Liu*, Effect of predeformation on microstructural evolution of a Zr alloy during 550-700°C aging after β quenching, Acta Materialia, 61 (2013) 3099-3109. (SCI一區，IF=4.4)

[2] B.F. Luan, L.J. Chai, G.L. Wu, H.B. Yu, J.W. Chen, Q. Liu*, Twinning during β → α slow cooling in a zirconium alloy, Scripta Materialia, 67 (2012) 716-719. (導師第一作者，SCI一區，IF=3.2)

[3] L. Chai, B. Luan*, D. Xiao, M. Zhang, K.L. Murty, Q. Liu, Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures, Materials & Design, 85 (2015) 296-308. (SCI二區，IF=3.5)

[4] L. Chai*, B. Chen, S. Wang, N. Guo, C. Huang, Z. Zhou, W. Huang, Microstructural changes of Zr702 induced by pulsed laser surface treatment, Applied Surface Science, 364 (2016) 61-68. (SCI二區，IF=2.7)

[5] L. Chai*, B. Chen, Z. Zhou, K.L. Murty, Y. Ma, W. Huang, A special twin relationship or a common Burgers misorientation between α plates after β quenching in Zr alloy?, Materials Characterization, 104 (2015) 61-65. (SCI二區，IF=1.8)

[6] W. Huang, L. Chai*, Z. Li, X. Yang, N. Guo, B Song, Evolution of microstructure and grain boundary character distribution of a tin bronze annealed at different temperatures, Materials Characterization, 2016, doi:10.1016/j.matchar.2016.02.022. (SCI二區，IF=1.8)

[7] L. Chai*, B. Chen, S. Wang, Z. Zhou, W. Huang, Microstructural characteristics of a commercially pure Zr treated by pulsed laser at different powers, Materials Characterization, 110 (2015) 25-32. (SCI二區，IF=1.8)

[8] L. Chai, B. Luan*, M. Zhang, K.L. Murty, Q. Liu*, Experimental observation of 12 α variants inherited from one β grain in a Zr alloy, Journal of Nuclear Materials, 440 (2013) 377-381. (SCI二區，IF=1.8)

[9] L. Chai, B. Luan*, K.L. Murty, Q. Liu*, Twinning during recrystallization cooling in α-Zr alloy, Materials Science and Engineering A, 576 (2013) 320-325. (SCI二區，IF=2.5)

[10] L.J. Chai, B.F. Luan*, S.S. Gao, J.W. Chen, Q. Liu, Study of precipitate evolution and recrystallization of β-quenched Zr-Sn-Nb-Fe-Cr-Cu alloy during aging, Journal of Nuclear Materials, 427 (2012) 274-281. (SCI二區，IF=1.8)

[11] B.F. Luan*, L.J. Chai, J.W. Chen, M. Zhang, Q. Liu, Growth behavior study of second phase particles in a Zr-Sn-Nb-Fe-Cr-Cu alloy, Journal of Nuclear Materials, 423 (2012) 127-131. (導師第一作者，SCI二區，IF=1.8)

[12] L. Chai, B. Chen, B. Luan*, Q. Liu, Electron backscatter diffraction investigation of duplex-phase microstructure in a forged Zr-2.5Nb alloy, Science China Technological Sciences, 2016, DOI: 10.1007/s11431-016-6019-0. (SCI三區，IF=1.2)

[13] L.J. Chai, Z.M. Zhou*, Z.P. Xiao, J. Tu, Y.P. Wang, W.J. Huang, Evolution of surface microstructure of Cu-50Cr alloy treated by high current pulsed electron beam, Science China Technological Sciences, 58 (2015) 462-469. (SCI三區，IF=1.2)

[14] L. Chai, B. Luan*, J. Chen, J. Zhou, Q. Liu, Effect of cooling rate on β → α transformation during quenching of a Zr-0.85Sn-0.4Nb-0.4Fe-0.1Cr-0.05Cu alloy, Science China Technological Sciences, 55 (2012) 2960-2964. (SCI三區，IF=1.2)

2015年重慶市優秀博士學位論文；

2015年重慶大學優秀博士論文；

2014年重慶理工大學“青年英才”；

2012年教育部“博士研究生學術新人獎”；

重慶理工大學“材料表（界）面科學與工程”創新團隊成員