劉嵐

劉嵐，1974.12出生，研究生/工學博士，西北工業大學機電學院機械工程及自動化系副教授。

研究方向1：機械系統動力學。主要研究齒輪傳動系統設計方法與體系、齒輪傳動系統動力學、齒輪傳動裝置雜訊預測技術與分析方法。

研究方向2：現代計算分析方法。主要研究有限元方法、概率有限元分析方法、計算接觸力學、無網格法等。

研究方向3：仿生機械學。主要研究微撲翼仿生飛行器的結構設計與製作、撲翼氣動分析與試驗、仿生翼的設計技術及其流固耦合分析方法等。

LIU Lan, DING Yunfei, WU Liyan, LIU Geng. Effects of Contact Ratios on Mesh Stiffness of Helical Gears for Lower Noise Design [C]. International Gear Conference 2014, Aug. 26-28th, 2014, Lyon, France. 320-329

丁雲飛，劉嵐，吳立言，常樂浩，斜齒圓柱齒輪嚙合剛度波動的變化規律研究，機械傳動，2014, 38(5): 24-27.

Liu Lan, Liu Geng, Wu Liyan. Vibration and Noise Analyses for a Multi-stage Power-split Gear System. International Conference on Gears 2013, Munich, Germany, October 7-9, 2013, 1491-1494.

Liu Lan, He Zhaoxia, Zhang Xiaocai. Axial Deformation of Ball Screw Considering Contact Angle. Applied Mechanics and Materials, Vols. 300-301 (2013.2) pp785-788, (EI: 20131116115110)

Liu Lan, Zhang Xijin, He Zhaoxia. Aerodynamic Analysis and Wind Tunnel Test for Flapping-wing MAVs. Journal of Theoretical and Applied Information Technology, 2012, 45(2): 542-550 (2012.12)(EI: 20131016083181)

Lan Liu, Geng Liu, Ruiting Tong and Saiying Jin. An adaptive EFG-FE coupling method for elasto-plastic contact of rough surfaces. Materials Science and Engineering(WCCM/APCOM 2010), Vol.10 (2010.7) pp.1~9 (EI: 20110313581541) (EI: 20144200099494) 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, 2010, July 19-23, Sydney.(ISTP: 000290445000222)

劉嵐, 劉更, 曾泉人, 孫莉. 衝擊載荷下載人飛行器乘員頸椎力學行為研究. 機械設計與製造, 2010, (4): 255-257.

Lan Liu, Zhaoxia He. Simulation and Experiment for Rigid and Flexible Wings of Flapping-wing Microrobots. Advanced Materials Research Vols. 97-101 (2010.3) pp 4513-4516 (EI收錄: 20101612863827）

Liu Lan, Liu Geng, He Zhaoxia. Simulation Flow Management for Planetary Gear Transmission. Proceedings 2009 IEEE 16th Intenational Coference on Industrial Engineering and Engineering Management, p1865-1868, 2009.10, Beijing (EI收錄: 20101212777993)

劉嵐，賀朝霞. 基於虛擬樣機技術的機構綜合動力平衡方法研究. 機械設計與製造，2009.10，p157~159

Liu Lan, Fang Zongde, He Zhaoxia. Optimization design of flapping mechanism and wings for flapping-wing MAVs. Intelligent Robotics and Applications(ICIRA 2008), p245～255, 2008.10 (EI：20084911762188 ISTP: 000261049200027)

劉嵐, 方宗德, 侯宇, 張西金. 微型撲翼飛行器的升力風洞試驗研究. 航空動力學報, 2007，22(8):1315~1319（EI收錄：20073710810276）

劉嵐, 方宗德, 侯宇. 撲翼飛行的氣動建模與模擬分析. 計算機模擬, 2006, 23(3):49～51

劉嵐, 方宗德, 侯宇, 傅衛平, 吳立言. 仿生微撲翼飛行器的翅翼設計與優化. 機械科學與技術, 2005, 24(3):330～334

劉嵐, 方宗德, 侯宇, 吳立言. 微撲翼飛行器的尺度律研究與仿生設計. 中國機械工程, 2005,16(18):1613～1617 （EI收錄：2005449453798）

劉嵐, 方宗德, 侯宇, 傅衛平. 微型撲翼飛行器的氣動建模分析與試驗. 航空動力學報, 2005, 20(1):22～28 （EI收錄：2005129008056）

Liu Lan, Fang Zongde, Hou Yu. Biomimetic Wings Design and Optimization for Piezoelectrically Actuated Flapping-Wing Microrobots. Proceedings of the First Asia International Symposium on Mechatronics, September 27-30, 2004, Xi’an, China

劉嵐, 劉更, 吳立言, 趙寧. 循環對稱結構動態響應問題的可靠性分析. 機械工程學報, 2002, 38(12):29～33 （EI收錄：2003357615627）

He Zhaoxia, Liu Lan, Zhang Xijin. Bionic flapping-wing mechanism modelling and simulation of flapping wingtip trajectory. International Journal of Applied Mathematics and Statistics，2013，Vol47，No17，363-371（EI：20134717006370）

He Zhaoxia, Chang Lehao, Liu lan. Vibration Influence Chart of herringbone planetary gear train. Sensors & Transducers，2013，Vol23，Special Issue，144-151（EI：20135017073183）

Tong Ruiting, Liu Geng, Liu Lan, Wu Liyan, Adaptive multiscale method for two-dimensional nanoscale adhesive contacts, Chinese Journal of Mechanical Engineering, 2013, 26(3): 606-612. (SCI: 000319067100023, EI: 20132116364867)

Ruiting Tong, Geng Liu, and Lan Liu, Studies on Nanoscale Sliding Contacts of Textured Surfaces by Multiscale Method, 2012 International Conference on Mechanical Engineering and Green Manufacturing (MEGM2012), Applied Mechanics and Materials, 2012.3 重慶, 2012, 155-156: 883-886. (EI: 20121114857274)

Tong Ruiting, Liu Geng, Liu Lan, Multiscale Analysis on Two-dimensional Nanoscale Adhesive Contacts, Chinese Journal of Mechanical Engineering, 2012, 25(3): 446-455(SCI: 000302282100005, EI: 20122315092946)

Tong Ruiting; Liu Geng; Liu Lan; Ma Shangjun, Multiscale analysis on friction-reducing characteristics of textured surface in nanoscale sliding contacts, Applied Mechanics and Materials, 2011, 86: 649-652. (EI: 20113814343002，ISTP：000306442100142) International Conference on Power Transmissions (ICPT'2011) October 25-29, 2011, Xi’an, China

Geng Liu, Ruiting Tong, Lan Liu and Tianxiang Liu，Multiscale Model for Nanoscale Textured Sliding Contacts, 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, 2010, July 19-23, Sydney

Quanren Zeng, Geng Liu, Lan Liu and Ruiting Tong, Surface Texture’s Role in Assessing Surface Integrity of Machined Parts, Applied Mechanics and Materials, 2010, 34-35: 1145-1148. (EI: 20110213557595 ISTP:000290180601020) International Conference on Mechanical Engineering and Green Manufacturing 2010, November 19-22, 2010, Xiangtan, China

Zhaoxia He, Geng Liu, Lan Liu, and Li He, Report Management in Performance Simulation for Complex Mechanical Product, Advanced Materials Research, 2010, 97-101: 3617-3621. (EI：20101612863635)

Quanren ZENG, Geng LIU, Lan LIU, Ruiting TONG, Framework of Surface Integrity Model for Machined Components, Advanced Materials Research, 2010, Vols. 139-141: 167-170. (EI: 20110113545711) (ISTP: 000290199900039) MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 17-19th, December., 2010, Guangzhou

Zhaoxia He, Geng Liu, Lan Liu, and Bing Han, Data Management System for Complex Mechanical Product in Collaborative Simulation Environment, Key Engineering Materials, 2010, 431-432: 196-200. (EI:20102613032369)

He Zhaoxia，Liu Geng，Liu Lan，He Li, Report Management in Performance Simulation for Complex Mechanical Product, Advanced Materials Research Vols. 97-101 (2010.3) pp 3617-3621 (EI收錄: 20101612863635)

Liu G., Tong R., Liu L., Liu T., Molecular Dynamics and Finite Element Coupling Method for Nanoscale Adhesive Contact Problems, 2009 STLE Annual Meeting & Exhibition, Disney’s Coronado Springs Resort, Orlando Florida, May 18-20, 2009. (EI收錄：20100912745730)

Liu Geng, Tong Ruiting, Liu Lan, Wu Liyan, An adaptive multiscale method for two dimensional nanoscale adhesive contacts, World Tribology Congress 2009, Kyoto, Japan, September 6–11, 2009

齒輪嚙合傳動的先進幾何設計與性能分析方法體系，2010，教育部高等學校科學研究優秀成果獎自然科學獎，二等獎。

齒輪先進嚙合理論研究及工程應用，2011，陝西省科學技術獎，二等獎。