李峰

1994.09-1997.07 齊齊哈爾市實驗中學 高中生

1997.09-2001.07 哈爾濱理工大學金屬材料專業 工學學士

2001.09-2004.02 哈爾濱理工大學材料加工專業 工學碩士

2004.03-2007.12 哈爾濱工業大學塑性加工專業 工學博士

2008.06-2010.10 哈爾濱工程大學材料科學與工程 博士后

2008.03-2009.07 哈爾濱理工大學材料成型系 講師

2009.08-2012.08 哈爾濱理工大學材料成型系 副教授(破格)

2012.09-2018.09 哈爾濱理工大學材料成型系 教授

2018.10-至今 哈爾濱理工大學材料成型系 教授、博士生導師

1. 高性能輕合金短流程擠壓成組技術研究

2. 板材柔性智能介質阻尼成形技術與裝備

3. 輕量化成形模具設計、製造與工藝優化

4. 材料成型過程CAD/CAE/CAM集成技術

作為負責人先後主持國家自然基金(2項)、國防973子課題、教育部博士點基金、中國博士后基金、省自然基金、省教育廳、市基金等多項課題的研究工作，代表性課題如下：

1.國家自然科學基金面上項目(51675143)：鎂合金連續變通道直接擠壓成形機理與形/性協同調控機制，2017.01-2020.12

2.國家自然科學基金青年基金(51205094)：鎂合金轉模擠壓成形機理與協調變形控制，2013.01-2015.12

3.國防973子課題(613152-16)：法向壓力作用下典型材料成形性能測試方法及裝置，2011.01-2014.06

4.國家重點實驗室開放基金(P2016-09)：磁性智能介質加壓板材拉深成形規律研究，2016.01-2017.12

5.省普通高等學校新世紀優秀人才培養計劃(1253-NCET-008)：板材冷壓變形連接理論及關鍵技術研究板材冷壓變形連接理論及關鍵技術研究，2013.06-2016.06

自工作以來(截止2018年底)先後在Mater Design、Mat Sci Eng A、Mater Lett、Comp Mater Sci、J Mater Sci Technol、Int J Adv Manuf Tech、Mech Res Commun、JOM、J Mater Eng Perform、Acta Metall Sin-Engl、Mater Trans、J Eng Manuf、J Mech Eng Sci等國內外學術期刊上以一作或通訊作者發表SCI論文61篇；編著2部。近年發表論文如下：

1.Xu Bo Li, Feng Li*, Xue Wen Li. Effect of different temperatures on deformation characteristics of AZ31 magnesium alloy by continuous variable cross-section direct extrusion. International Journal of Advanced Manufacturing Technology, 2018, 95(9-12):4623-4628 (SCI)

2.Ze-ping Bao, Feng Li*, Wen-yong Shi. Formability analysis of aluminum double-layer sheets using a magnetorheological fluid. Results in Physics, 2018,10:227-232 (SCI)

3.Cheng Chuang Jin, Feng Li*, Ze Ping Bao. Study on deep drawing of 304 stainless steel rectangular case with magnetic medium. International Journal of Advanced Manufacturing Technology, 2018, 94(1-4): 1525-1531 (SCI)

4.Yang Liu, Feng Li*, Xue Wen Li, Wen Yong Shi. Properties of Rolled AZ31 Magnesium Alloy Sheet Fabricated by Continuous Variable Cross-Section Direct Extrusion. Journal of Materials Engineering and Performance, 2018, 27(3):1334-1342 (SCI)

5.Xu Bo Li, Feng Li*, Xue Wen Li. Microstructural Analysis and Texture Evolution of the CVCEDed AZ31 Magnesium Alloy by Hot Rolling. Journal of Materials Engineering and Performance, 2018,27(9):4732- 4739 (SCI)

6.Xu Bo Li, Feng Li*, Xue Wen Li. Microstructural Characteristics of AZ31 Magnesium Alloy Processed by Continuous Variable Cross-Section Direct Extrusion (CVCDE). Part 1: Texture Evolution. JOM, 2018,70(10):2327-2331 (SCI)

7.Xu Bo Li, Feng Li*, Xue Wen Li. Microstructural Characteristics of AZ31 Magnesium Alloy Processed by Continuous Variable Cross-Section Direct Extrusion (CVCDE). Part 2: Dynamic Recrystallization. JOM, 2018,70(10):2332-2337 (SCI)

8.Ze Ping Bao, Feng Li*, Cheng Chuang Jin. Investigations on deformation behavior of square box deep drawing using a magnetorheological fluid (MRF). International Journal of Advanced Manufacturing Technology, 2018, 99(5-8):1459-1466 (SCI)

9.Feng Li*, Hong Wei Jiang, Yang Liu. Microstructure and Texture Evolution During the Alternate Extrusion of an AZ31 Magnesium Alloy. JOM, 2017,69(1):93-99 (SCI)

10.Feng Li*, Fu Jian Zhou, Mo Nan Wang, Shu Yue Zhu, Cheng Chuang Jin. New processing research on sheet metal bidirectional pressure forming using a magnetorheological fluid. International Journal of Advanced Manufacturing Technology, 2017,88(1):923-929 (SCI)

11.Feng Li*, Hong Wei Jiang, Qiang Chen, Yang Liu. New extrusion method for reducing load and refining grains for magnesium alloy. International Journal of Advanced Manufacturing Technology, 2017, 90(1): 73-79 (SCI)

12.Hong Wei Jiang, Feng Li*, Xiang Zeng. Microstructural characteristics and deformation of magnesium alloy AZ31 produced by continuous variable cross-section direct extrusion. Journal of Materials Science & Technology, 2017, 33(6):573-579 (SCI)

13.Feng LI*, Yang LIU, Xu-Bo LI. Dynamic recrystallization behavior of AZ31 magnesium alloy processed by alternate forward extrusion. Frontier of Materials Science, 2017,11(3):296-305 (SCI, 期刊封面)

14.Yang Liu, Feng Li*, Hong Wei Jiang. Microstructural Analysis and mechanical properties of AZ31 magnesium alloy prepared by alternate extrusion(AE). International Journal of Advanced Manufacturing Technology, 2017, 92(9-12):4293-4301 (SCI)

15.Feng Li*, Yang Liu, Xu Bo Li. Microstructure Evolution and Deformation Behavior of AZ31 Magnesium Alloy During Alternate Forward Extrusion. Acta Metallurgica Sinica(English Letters), 2017,30(11):1135- 1144 (SCI)

16.Feng Li*, Nan Bian, Yongchao Xu, Xiang Zeng. Dynamic Recrystallization and Microstructure Evolution of AZ31 Magnesium Alloy Produced by Extrusion through Rotating Container. Modern Physics Letters B, 2016,30(1): 1550261 (SCI)

17.Feng Li*, Hong Bin Wu, Xiang Zeng. Investigation of 7A09 aluminum alloy prepared by continuous variable cross-section direct extrusion(CVCDE). International Journal of Advanced Manufacturing Technology, 2016,82(5-8):1447-1453 (SCI)

18.Fujian Zhou, Feng Li*, Liansheng Shi, Hongwei Jiang. An optimizing process of profiled cross-sectional aluminum alloy porthole die extrusion using response surface methodology. Modern Physics Letters B, 2016,30(8): 1650098 (SCI)

19.Feng Li*, Fu Jian Zhou, Mo Nan Wang, Peng Xu, Cheng Chuang Jin. Experimental studies on flexible forming of sheet metals assisted by magnetic force transfer medium. JOM, 2016,68(8): 2261-2267 (SCI)

20.Feng Li*, Xiao Chong Sui, Peng Xu, Qiang liu. Effects of process conditions on the matched cold-pressing joining quality between dissimilar sheets. International Journal of Advanced Manufacturing Technology, 2015,76(9-12):1837-1843 (SCI)

21.Feng Li*, Wei Shi, Nan Bian, Hongbin Wu. Effect of accumulative strain on grain refinement and strengthening of ZM6 magnesium alloy during continuous variable cross-section direct extrusion. Acta Metallurgica Sinica(English Letters), 2015,28(5):649-655 (SCI)

22.Feng Li*, Peng Xu, Xiao Chong Sui, Fu Jian Zhou. Investigation of a New Method for Sheet Deep Drawing Based on the Pressure of Magnetic Medium. Materials Transactions, 2015,56(6):781-784 (SCI)

23.F. Li*, X. Zeng, G. J. Cao. Investigation of microstructure characteristics of the CVCDEed AZ31 magnesium alloy. Materials Science and Engineering A, 2015, 639:395-401 (SCI)

24.Feng Li*, Peng Xu, Xiaochong Sui, Fujian Zhou. Evaluation of the quality for sheet deep drawing using a magnetorheological fluid(MRF). Modern Physics Letters B, 2015,29(24):1550141 (SCI)

25.F. Li*, X. Zeng, Q. Chen, G. J. Cao. Effect of local strains on the texture and mechanical properties of AZ31 magnesium alloy produced by CVCDE. Materials and Design, 2015, 85:389-395 (SCI)

26.F Li*, N Bian, Y C Xu, X L Zhang. Theoretical analysis of extrusion through rotating container: Torque and twist angle. Computational Materials Science, 2014,88(6):37-44 (SCI)

27.Feng Li*, Xin Long Zhang, Bao Guo Yuan, Xiao Chong Sui. Research on the influence rules of hole type on the quality of sheet embedded cold-pressing joining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 2014,228(7):775-783 (SCI)

28.Feng Li*, Xiao Chong Sui, Xin Long Zhang, Qiang Liu. Research on Quality and Reliability of Cold-Pressing Joining Between Aluminum and Stainless Sheets. JOM, 2014,66(8):1454-1463 (SCI)

29.F Li*, N Bian, Y C Xu. An analytical model on twisting deformation of rod extrusion through conical die with rotating container. Mechanics Research Communications, 2014,61:27-35 (SCI)

30.Feng Li*, Xiao Chong Sui, Xin Xin Guo, and Hong Bin Dai. Experiment on the Reliability of Aluminum- Stainless Steel Joints by Cold-Pressing Joining. JOM, 2014,66(10):2161-2167 (SCI)

31.F. Li*, X. Zeng, N. Bian. Microstructure of AZ31 magnesium alloy produced by continuous variable cross-section direct extrusion(CVCDE). Materials Letters, 2014,135:79-82 (SCI)

32.Feng Li, Xin Long Zhang*, Wei Shi. Deformation Behavior in the Uniaxial Tension Process of Aluminum and Aluminum Alloy Sheets under Fluid Pressure. JOM, 2013,65(5):604-612 (SCI)

33.Feng Li*, Jun Feng Lin, Ming Da Xu, and Xiao Chong Sui. Forming Mechanism of Cold-Press Connection Between Heterogeneous Sheets. JOM, 2013,65(11): 1433-1440 (SCI)

34.Feng Li*, Jian Hui Li, Chao Li, L L Wang. Research on the deformation mechanism and failure behavior of punch bonding technology with dissimilar sheet metals. JOM, 2012,64(5):600-606 (SCI)

35.LI Feng*, LIN Jun-feng, SUI Xiao-chong, BIAN Nan, XU Ming-da. Cold-pressing deformation characteristics of steel-aluminum sheets joining. Transactions of Nonferrous Metals Society of China, 2012, 22(S2):553-559 (SCI)

1.李峰等. 旋轉凹模的金屬擠壓成形方法，國家發明專利，專利號：ZL200810064386.7 (授權)

2.李峰等. 一種降低塑性回彈的金屬板材加工成形方法，國家發明專利，專利號：ZL200810064528.X (授權)

3.李峰等. 大截面差變徑管件的加工裝置及成形方法，國家發明專利，專利號：ZL200910071561.X (授權)

4.李峰等. 一種變徑管件內壓成形裝置及方法，國家發明專利，專利號：ZL201010032430.3 (授權)

5.李峰等. 連續變截面直接擠壓製備細晶材料的裝置及方法，國家發明專利，專利號：ZL201010032431.8 (授權)

6.李峰等. 磁致介質加壓的板材充液拉深成形裝置及方法，國家發明專利，專利號：ZL201210486544.4 (授權)

7.李峰等. 變截面空心構件內壓成形裝置及方法，國家發明專利，專利號：ZL201210486545.9 (授權)

8.李峰等. 板材液壓成形中摩擦影響的測試裝置及方法，國家發明專利，專利號：ZL 201310097449.X (授權)

9.李峰等. 流體壓力作用下板材成形性能測試裝置及方法，國家發明專利，專利號：ZL201310115829.1 (授權)

10.李峰等. 一種金屬板材變形連接成形方法，國家發明專利，專利號：ZL201310115830.4 (授權)

11.李峰等. 帶筋整體壁板擠軋複合成形裝置及方法，國家發明專利，專利號：ZL201310116069.6 (授權)

12.李峰等. 變階面空心構件擠壓成形方法，國家發明專利，專利號：ZL201310115271.7 (授權)

13.李峰等. 一種階變截面型材模塊化擠壓成形裝置及方法，國家發明專利，專利號：ZL201310323167.7 (授權)

14.李峰等. 一種金屬材料變截面擠扭成形裝置及方法，國家發明專利，專利號：ZL201310571193.1 (授權)

15.李峰等. 齒輪徑向旋鍛成形裝置及方法，國家發明專利，專利號：ZL201410008451.X (授權)

16.李峰等. 柔性鏈球式芯棒的管材壓彎成形方法，國家發明專利，專利號：ZL201410008325.4 (授權)

17.李峰等. 金屬交替擠壓成形裝置及方法，國家發明專利，專利號：ZL201510208534.8 (授權)

18.李峰等. 板材磁性介質阻尼成形裝置及方法，國家發明專利，專利號：ZL201510212432.3 (授權)

19.李峰等。一種基於電流變液的板材拉深成形裝置及方法，國家發明專利，專利號：ZL201610024505.0 (授權)

20.李峰等. 彎曲構件錯距擠壓成形裝置及方法，國家發明專利，專利號：ZL201710156437.8 (授權)

21.李峰等. 磁性介質輔助管材內壓成形方法，國家發明專利，專利號：ZL201710156361.9 (授權)

22.李峰等. 高性能金屬板材的短流程擠壓成形裝置及方法，國家發明專利，申請號：201810181290.2

23.李峰等. 金屬張力擠壓成形裝置及方法，國家發明專利，申請號：201810357482.4

24.李峰等. 板材批量模塊化側向擠壓成形裝置及方法，國家發明專利，申請號：201811219659.0

25.李峰等. 金屬板材控幅擠壓成形裝置及方法，國家發明專利，申請號：201811219554.5

2016年黑龍江省自然科學二等獎1項(排名3)；

2011年黑龍江省技術發明二等獎1項(排名5)；

2011年黑龍江省自然科學三等獎1項(排名3)；

2017年哈爾濱市科學技術二等獎1項(排名1)；

2013年黑龍江省自然科學技術學術成果一等獎1項(排名1)；

2012年黑龍江省高等教育學會優秀教育科研成果一等獎1項(排名1)；

2011年哈爾濱理工大學校青年拔尖創新人才；

2013年黑龍江省普通高等學校新世紀優秀人才；

2013年第十一屆哈爾濱市青年科技獎；

2014年第十四屆霍英東教育基金會高等院校青年教師獎；

2016年第二屆哈爾濱理工大學校青年五四獎章；

2018年材料加工工程省級領軍人才梯隊後備帶頭人

2014.10-至今 《精密成形工程》編委

2018.10-至今 中國機械工程學會環境保護與綠色製造技術分會委員

2017.11-至今 中國機械工程學會生產工程分會模具製造專業委員會委員

2017.05-至今 中國兵工學會精密成形工程委員會委員

2016.02-至今 中國塑性工程學會精密鍛造專業委員會委員

2016.01-至今 中國材料研宄學會鎂合金青年委員會委員

2011.11-至今 中國塑性工程學會青年工作委員會委員

2009.06-至今 中國機械工程學會高級會員

2010.07-至今 國家自然科學基金通訊評審專家

2013.09-至今 北京市自然科學基金評審專家

2013.10-至今 天津市自然科學基金評審專家

2012.07-至今 吉林省科學技術獎評審專家

2011.01-至今 黑龍江省科技項目評審專家

2010.08-至今 哈爾濱市傑青/攻關/科技獎勵評審專家

Nano Energy(13.12、SCI)、Materials and Design(SCI)、Journal of Alloys and Compounds(SCI)、International Journal of Advanced Manufacturing Technology(SCI)、Metallurgical and Materials Transactions B(SCI)、JO M(SCI)、Mechanics of Advanced Materials and Structures(SCI)、Journal of Materials Engineering and Performance(SCI)、Journal of Engineering Manufacture(SCI)、Journal of Mechanical Engineering Science(SCI)、Journal of Testing and Evaluation(SCI)、Materials Research Express(SCI)、Advances in Mechanical Engineering(SCI)、Materials Research Innovations(SCI)、Engineering Failure Analysis(SCI)、International Journal of Mineral Processing(SCI)、Journal of Environmental Sciences(SCI)、Indian Journal of Engineering and Materials Sciences(SCI)、AIP Advances(SCI)、Materials Chemistry and Physics(SCI)、Sensors and Actuators B: Chemical(SCI)、Arabian Journal of Chemistry(SCI)、Journal of Saudi Chemical Society(SCI)、Chinese Chemical Letters(SCI)、Saudi Journal of Biological Sciences(SCI)、Transactions of Nonferrous Metals Society of China(SCI)、Journal of Central South University(SCI)、Journal of Magnesium and Alloys、Frontiers of Mechanical Engineering、International Journal of Engineering and Technology Innovation、International Journal for Computational Methods in Engineering Science and Mechanics、Materials Research、The Open Mechanical Engineering Journal、稀有金屬材料與工程(SCI)、航空學報(EI)、工程力學(EI)、中國機械工程、船舶工程等國內外期刊通訊審稿專家。

材料加工理論(塑性加工部分) 研究生課

特種塑性成形 本科生課

快速成型及3D列印技術 本科生課

塑性成形過程數值模擬 本科生課

畢業：11級~16級(全日制)研究生14名獲碩士學位，其中，9人獲研究生國家獎學金（教育部頒發，評選比例為2~3%），12人獲校科技活動先進個人；

在讀：17級~18級(全日制)研究生6名。

素質要求：誠邀勤奮刻苦、誠實守信、樂於專研、開拓進取、勇於創新的有識有志之士加入；

專業要求：材料類、機電類、工程力學等理工科相關專業均可；

招生規模：碩士生2~4人/屆，博士生1~2人/屆。