蔣晗

蔣晗，博士，西南交通大學教授，博士生導師,《實驗力學》編委。

工作學習經歷

2010-今 西南交通大學力學與工程學院 教授(2016) 博士生導師(2013)

2009-2010 Texas A&M University, USA 博士后研究員

2005-2009 Texas A&M University, USA 機械工程 博士

2002-2004 University of Nebraska-Lincoln，USA 助研

2001-2002 University of Science and Technology of Lille, France 訪問學者

1995-2001 葛洲壩水電工程學院 講師

1992-1995 重慶大學固體力學 碩士

1988-1992 重慶大學 工程力學 學士

主要研究方向

高分子材料刮擦破壞研究

高分子材料力學性能、本構關係

非線性材料性能分析

感興趣領域

非均勻材料多尺度表徵

超高性能混凝土力學行為分析

主持項目

國家自然科學基金 1.國家自然科學基金面上項目(11472231), “高分子材料刮擦破壞的實驗技術與機理分析”, 2015.1-2018.12 2.國家自然科學基金面上項目(11172249), “基於多軸載入粘彈塑性本構模型的高分子材料刮擦破壞機理”, 2012.1-2015.12 省部級基金 1.機械結構強度與振動國家重點實驗室開放課題(SV2016-KF-02)，"複雜服役環境下的粘彈材料長效性能加速實驗方法",2016.1-2017.12 2.教育部“新世紀優秀人才支持計劃”(NCET-12-0938),“高分子材料非線性本構特徵對錶面刮擦破壞的影響”，2013.1-2015.12 3.四川省創新人才（2013), 主持 4.四川省傑出青年學術技術帶頭人資助計劃(2013JQ0010), “複雜載入下的高分子材料表面損傷機理研究”, 2013.1-2015.12 5.高分子材料工程國家重點實驗室開放課題(KF201204)，“高分子材料長期性能的時溫力等效原理加速研究”，2012.10-2014.9 6.教育部留學回國人員科研啟動基金, “聚合物表面刮擦破壞機理研究”, 2012.3-2014.2 7.四川省傑出青年學術技術帶頭人培育計劃(2011JQ0026), “高分子複合材料表面刮擦損傷特性及破壞機理研究”, 2011.1-2012.12 8.四川省應用基礎研究項目(2010JY0069), “高分子材料表面耐刮擦性能研究”, 2010.10-2012.12 其他 1.廣州市科技局企業科技攻關難題項目（2011J5100012），“車用聚丙烯材料表面耐刮擦性能提高關鍵技術”，2011.1-2012.12 2.中央高校基本科研業務費科技創新研究項目(SWJTU09ZT35), “高分子材料表面損傷特性研究”, 2011-2012 3.重慶建工第七建築工程有限責任公司研究項目,“遠程實時建築工程智能管理系統研究”，2012-2013 參與項目

1.國家自然科學基金面上項目(11272269), “熱塑性聚合物材料的濕-熱-力耦合循環本構關係研究”, 2013.1-2016.12

2.美國交通部研究項目(DTPH56-06-T-000022), “管道塗層完整性和層間粘結性能”, 2006.1-2009.12

3.跨國公司聯合研究項目(32525-15084), “高分子材料表面刮擦行為及性能研究”, 2005.1-2010.4

論文論著

發表英文獨著一部、英文合著二部、中文合著一部，制定ISO國際標準一項，在《Polymer》、《Polymer Testing》、《Wear》、《Tribology International》、《Applied Surface Science》、《Journal of Materials Science》等知名學術期刊發表SCI論文40餘篇。

英文專著

Han JIANG, Scratch Behaviors of Polymeric Materials, ISBN 978-3-8484-0342-4,V Akademikerverlag GmbH & Co. KG, 2012

英文合著

Han JIANG, MECHANICAL PROPERTIES' INFLUENCE ON POLYMER SCRATCH BEHAVIOR: EXPERIMENTAL STUDY AND MECHANISMS ANALYSIS,Frontiers in Applied Mechanics,World Scientific Publishing Co Pte Ltd ,ISBN: 978-1-78326-683-8,2015

Browning Robert,Han JIANG, Sue Hung-Jue,Tribology of Polymer Nanocomposites:Chapter 15, ISBN 978-0-444-53155-1,Elsevier,2008

中文合著

康國政、蔣晗、闞前華, 連續介質力學基礎及其應用，科學出版社,2015

近年發表期刊論文

2016

1. Qian CHENG, Chengkai JIANG, Jianwei ZHANG, Zhuoran YANG, Zhongmeng ZHU,Han JIANG*, Effect of thermal aging on the scratch behavior of poly (methyl methacrylate), Tribology International, v101, 110-114, 2016

2. Zhongmeng Zhu, Qian Chen, Chengkai Jiang, Jianwei Zhang,Han JIANG*, Scratch behavior of the aged hydrogenated nitrile butadiene rubber, Wear, v352–353, 155-159, 2016

3. Kaijuan Chen, Guozheng Kang, Fucong Lu, Jianhang Xu,Han JIANG, Temperature-dependent uniaxial ratchetting of ultra-high molecular weight polyethylene, Fatigue & Fracture of Engineering Materials & Structures, v39(7), 839-849,2016

4. Fucong Lu, Guozheng Kang, Yilin Zhu, Congcong Xi ,Han JIANG, Experimental observation on multiaxial ratchetting of polycarbonate polymer at room temperature, Polymer Testing, v50, 135-144, 2016

5. Jianwei ZHANG,Han JIANG*, Chengkai JIANG, Qian CHENG, Guozheng Kang, In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate, Tribology International, v95, 1-4, 2016

6. Kaijuan CHEN, Guozheng KANG, Chao YU, Fucong LU,Han JIANG, Time-dependent uniaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Viscoelastic-viscoplastic constitutive model, Journal of Applied Mechanics, V83(10), 2016

7. Hang Li, Guozheng Kang ,Yujie Liu,Han JIANG, Non-proportionally multiaxial cyclic deformation of AZ31 magnesium alloy: Experimental observations, Materials Science and Engineering: A,v671 (1) ,70–81, 2016

2015

1. Kaijuan Chen, Guozheng Kang, Fucong Lu,Han JIANG*,Uniaxial cyclic deformation and internal heat production of ultra-high molecular weight polyethylene,Journal of Polymer Research, v22(11):217, 2015

2. Zhongmeng Zhu, Chengkai Jiang, Qian Chen, Jianwei Zhang, Shaoyun Guo, Ying Xiong, Baoqiang Fu, Wenlong Yang,Han JIANG*,Accelerated aging test of hydrogenated nitrile butadiene rubber using the time-temperature-strain superposition principle,RSC Advances, v5(109), 90178-90183, 2015

3. Chengkai Jiang,Han JIANG*, Jianwei Zhang, Guozheng Kang,A visco-elastic-plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate,Polymer Engineering and Science, v55(11), 2559-2565, 2015

4. Chengkai Jiang,Han JIANG*, Zhongmeng Zhu, Jianwei Zhang, Shaoyun Guo, Ying Xiong,Application of Time–Temperature–Stress Superposition Principle on the Accelerated Physical Aging Test of Polycarbonate,Polymer Engineering and Science, v55(10), 2215-2221, 2015

5. Jianwei Zhang,Han JIANG*, Guozheng Kang, Chengkai Jiang, FucongLu,A new form of equivalent stress for combined axial–torsional loading considering the tension–compression asymmetry of polymeric materials,RSC Advances, v5(89), 72780-72784,2015

6.Han JIANG*, Qian CHENG, Chengkai JIANG, Jianwei ZHANG, Yonghua LI,Effect of Stick-slip on the Scratch Performance of Polypropylene,Tribology International, v91, 1-5, 2015

7. Jianwei Zhang,Han JIANG*, Chengkai Jiang, Guozheng Kang, Fucong Lu,Accelerated ratcheting testing of polycarbonate using the time-temperature-stress equivalence method,Polymer Testing, v44, 8-14, 2015

8. Congcong Xi, Guozheng Kang, Fucong Lu, Jianwei Zhang,Han JIANG,An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights,Materials and Design, v67, 644-648, 2015

Before 2015...

Kang Guozheng, Dong Yawei, Liu Yujie,Han JIANG, Macroscopic and microscopic observations on uniaxial ratchetting of two-phase Ti-6Al-4V alloy, Materials Characterization, v92, 26-35, 2014

Fucong Lu, Guozheng Kang,Han JIANG, Jianwei Zhang, Yujie Liu,Experimental studies on the uniaxial ratchetting of polycarbonate polymer at different temperatures, Polymer Testing, v39, 92-100,2014

Han JIANG*, Jianwei Zhang, Guozheng Kang, Congcong Xi, Chengkai Jiang, Yujie Liu, A test procedure for separating viscous recovery and accumulated unrecoverable deformation of polymer under cyclic loading, Polymer Testing,v32,1445–1451,2013

Dong Yawei, Kang Guozheng, Liu Yujie,Han JIANG,Multiaxial ratcheting of 20 carbon steel: Macroscopic experiments and microscopic observations, Materials Characterization,v83,1-12,2013

Pan Douxing, Kang Guozheng,Han JIANG, Viscoelastic Constitutive Model for Uniaxial Time-dependent Ratcheting of Polyetherimide (PEI) Polymer, Polymer Engineering & Science, 52(9), 1874–1881,2012

Zhang JianWei,Han JIANG, Study of material parameters' effect on polymer scratch using SOM method, Advanced Materials Research, v452-453, 1420-1423, 2012

Han JIANG, Robert Browning, Peng Liu, T. A. Chang and Hung-Jue Sue, Determination of epoxy coating wet-adhesive strength using a standardized ASTM/ISO scratch test, Journal of Coatings Technology Research, v 8, n 2, 255-263, 2011

Mohammad Motaher Hossaina,Han JIANGand Hung Jue Sue,Effect of Constitutive Behavior on Scratch Visibility Resistance of Polymers-A Finite Element Method Parametric Study, Wear, 270,751–759,2011

Han JIANG, Browning Robert L., Hossain Mohammad M., Sue Hung-Jue, Fujiwara Mikihiko, Quantitative evaluation of scratch visibility resistance of polymers, Applied Surface Science, v 256, n 21, 6324-6329, 2010

Han JIANG, Browning, R., Whitcomb, J.D., Ito, M., Shimouse, M., Chang, T.A., Sue H.-J., Mechanical modeling of scratch behavior of polymeric coatings on hard and soft substrates, Tribology Letters, v 37, n 2, 159-167, 2010

Han JIANG, Browning Robert, Sue Hung-Jue,Understanding of scratch-induced damage mechanisms in polymers , Polymer, v50, n 16, 4056-4065, 2009

Moghbelii Ehsan ,Sun Luyi,Han JIANG, Boo Woong J., Sue, Hung-Jue , Scratch behavior of epoxy nanocomposites containing α-zirconium phosphate and core-shell rubber particles, Polymer Engineering and Science, v 49, n 3, 483-490, 2009

Han JIANG, Browning Robert, Fincher Jason, Gasbarro Anthony, Jones Scooter, Sue Hung-Jue,Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins, Applied Surface Science, v 254, n15, 4494-4499, 2008

Browning Robert L. ,Han JIANG, Moyse Allan, Sue Hung-Jue, Iseki Yuki,Ohtani Kousuke, Ijichi Yasuhito, Scratch behavior of soft thermoplastic olefins: Effects of ethylene content and testing rate, Journal of Materials Science, v43, n 4, 1357-1365, 2008

Han JIANG, Lim G.T., Reddy J.N., Whitcomb J.D., Sue H.-J., Finite element method parametric study on scratch behavior of polymers, Journal of Polymer Science, Part B: Polymer Physics, v 45, n 12, 1435-1447, 2007

近年發表會議論文

Han JIANG, Yonghua Li, Bo Yang, Yan Yang, Zhongfu Luo, Chao Ding,Guangqiang Chen, H.J. Sue, Stick-slip phenomena and its influence on polymer scratch, 11th-Annual SPE TPO Conference, 2010

Yonghua Li, Bo Yang, Yan Yang, Zhongfu Luo, Chao Ding,Guangqiang Chen,Han JIANG, Study of scratch performance of polypropylene based automotive material, 11th-Annual SPE TPO Conference, 2010

R.L. Browning, P. Liu,Han JIANG, M. Hossain, and H.-J. Sue, A Comparative Study of Scratch Visibility Assessment Between Erichsen Delta L and ASTM/ISO Methods, 11th-Annual SPE TPO Conference, 2010

Han JIANG, R.Browning, B.T.A. Chang, H.J.Sue, A new approach for determination of wet adhesive strength of epoxy coatings on steel substrate, NACE International - Corrosion 2010 Conference and Expo. 2010

Browning, RobertL.,Han Jiang, Liu, Peng,Moyse, Allan, Sue, Hung-Jue,Recent progress in scratch & mar testing and evaluation of thermoplastic olefins InternationalPolyolefinsConference 2010, 2010,

Browning, Robert Lee,Han JIANG, Song,Yishu, Sue, Hung-Jue, Ito,Motoko, Fujiwara,Mikihiko,Gasbarro,Anthony,Anew method for abrasion resistance measurement of thermoplastic olefins,67th Annual Technical Conference of the Society of Plastics Engineers - ANTEC, Conference Proceedings, v 2, 908-913, 2009

Han JIANG, Whitcomb John D., Sue Hung-JueMechanical modeling of scratch induced periodic damage, 11th-Annual SPE TPO Conference, 2009

Chang Benjamin T. A. , Sue Hung-Jue,Han JIANG,BrowingBobby,WongDennis, Pham Ha,GuoShu,KehrAl,MallozziMeghan, Snider William,SiegmundAl,Integrityof 3LPE pipeline coatings - Residual stresses and adhesion degradation, Proceedings of the Biennial ASME International Pipeline Conference, IPC, v2, 75-86, 2009

Browning Robert Lee ,Han JIANG,MoyseAllan, Sue Hung-Jue, Lau Edmund, Quantitative abrasion evaluation of thermoplastic olefins, InternationalPolyolefinsConference - FLEXPACKCON 2008, v 3, 1703-1707, 2008

Han JIANG, Browning Robert L.,Sue,Hung-Jue, Automated quantitative scratch visibility determination based on ASTM D7027-05 test method, Automotive TPO Global Conference, p 436-443, 2008

Browning R.L., Lim G.-T.,Han JIANG,MoyseA., Sue H.-J., Chen H., Earls J., White J. Scratch behavior of polymer coatings, Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 1, p 37-40, 2006

Han JIANG, Browning R.,MoyseA., Sue H.-J. , Effects of surface texture and surface roughness on polymer scratch behavior, Society of Plastics Engineers Annual Technical Conference–ANTEC Conference Proceedings, v 3, p 1503-1507, 2007

Han JIANG, Lim G.T., Ready J.N., Whitcomb J.D., Sue H.-J., Parametric study on scratch behavior ofploymers, Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 1, 50-54, 2006

Browning R.L. , Lim G.T.,Han JIANG,MoyseA.,MoghbelliE., Sue H.-J.,AEintegrated approach to study scratch behavior of TPOs, International Conference onPolyolefins2006, v 2, 527-531, 2006

Browning, R. , Lim G.,Han JIANG, Sue H.-J. , Scratch behavior of anisotropic polypropylene surfaces, Automotive ThermoplasticPolyolefins(TPO) Global Conference , v 2006, 422-430, 2006

Chang B.T.A. ,Han JIANG, Sue H.-J.,GuoS.,StJeanG., Pham H., Wong D.,KehrA.,MallozziM., Lo K.H.,Disbondmentmechanism of 3LPE pipeline coatings, 17th International Conference on Pipeline Protection, 247-256, 2007

Browning Robert Lee ,Han JIANG,MoyseAllan, Sue Hung-Jue, Lau Edmund, Mar behavior of thermoplastic olefins, Society of Plastics Engineers Annual Technical Conference -ANTEC,ConferenceProceedings, v 1, p 255-259, 2007

Browning R.,Han JIANG, Lim G.-T.,MoyseA., Sue H.-J.,Evaluationand modeling of scratch resistance of polymers, Source: Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 2, 728-730, 2006

科研獎勵

教育部新世紀優秀人才支持計劃

四川省傑出青年基金計劃

教學獎勵

2013年度教學比賽二等獎

學術兼職

全國塑料標準化技術委員會委員

四川省力學學會秘書長

四川省科技青年聯合會常務理事

科研團隊

西南交通大學科研創新團隊 高速列車關鍵基礎力學問題

康國政，王弘，沈火明，蔡力勛，江曉禹，史智，蔣晗，張娟，朱志武，劉宇傑，闞前華，李翔宇，包陳，張旭

研究生

博士研究生

姓名 年級 論文題目 畢業去向

張建偉 2012級 考慮韌脆競爭機制的非晶態高分子材料刮擦破壞機理研究 鄭州大學力學與工程科學學院

蔣成凱 2013級 在讀

朱忠猛 2015級 在讀

程前 2016級 在讀

碩士研究生

姓名 年級 論文題目 畢業去向

張建偉 2011級 碩博連讀

蔣成凱 2012級 碩博連讀

王文談 2012級 超高性能纖維增強混凝土（UHPFRC）的實驗研究及低速衝擊有限元模擬 中鐵山橋集團有限公司

朱忠猛 2013級 碩博連讀

程前 2013級 高分子材料刮擦實驗設備設計與實驗應用 讀博

魏耀富 2014級 在讀

劉傑 2015級 在讀

楊卓然 2015級 在讀

馬俊 2016級 在讀

彭啟迪 2016級 在讀

課程教學

1）研究生課程

1.《專業英語》

2.《非彈性本構理論及其有限元實現》

2）本科生課程

1.《計算方法I》

2.《工程力學C》

3.《專業英語II 》

3）留學生課程（全英文授課）

1.《Nonlinear Continuum Mechanics》

2.《Strength Theories， Damage and Fracture》

實踐教學

1.指導本科生畢業設計，力學專業

2.指導大學生SRTP訓練計劃項目

招生名額

每年招收博士生1-2名，碩士生1-2名。

招生要求

優先招收對象：願意攻讀博士學位，主動思考並樂於去證實/否定自己的想法，對材料的力學性能（不限於高分子材料）的實驗和理論研究感興趣，有較強的力學相關專業知識。